Back to Product
Installation

Biomax N-X990 Biometric Terminal Installation & Wiring Guide

The Biomax N-X990 (cataloged under KT ERP reference KTI01002003X990, HSN 85437099) is an integrated biometric access control and time-attendance terminal engineered for corporate offices, manufacturing plants, educational institutions, and construction sites. Proper field installation requires adherence to specified mechanical dimensions, dedicated DC power delivery, precise access control relay wiring, and correct peripheral bus termination.

Physical Mounting & Operating Environment

The unit features physical dimensions of 160 mm x 210 mm x 40 mm (datasheet profile) / 210 mm x 157 mm x 40 mm (ERP profile) and a bare net weight of 0.65 kg. When surface-mounting the terminal to an interior wall or turnstile bracket, ensure the mounting height positions the 3-inch TFT color display and 500 DPI optical biometric prism at an ergonomic angle for flat, centered finger presentation.

Deploy the unit strictly within its certified environmental parameters to preserve biometric scan accuracy and internal electronics:

  • Operating Temperature Range: 0°C to 50°C (datasheet specification) / 0°C to 45°C (catalog threshold).
  • Operating Humidity: 20% to 80% non-condensing relative humidity.
  • Sensor Prism Alignment: Position the terminal away from extreme direct glare or wet exposure to allow the optical glass prism to process dry, moist, rough, or dyed fingerprints cleanly.

Power Supply Requirements

The Biomax N-X990 operates on a regulated DC power input of 12V DC at 1.5A to 2A. In access control setups operating external lock hardware, use an isolated or suitably rated linear/switched power supply unit (PSU) with shared ground reference. The terminal architecture supports optional internal or external backup batteries (they are not included) to sustain attendance logging and access authentication during utility power interruptions.

Door Access Control Relay & Exit Hardware Integration

Physical door locking mechanisms interface directly with the onboard door relay output. The internal relay provides dry contacts configured to switch power to magnetic locks, electric strikes, or turnstile barrier controllers.

  • Lock Output: Connect the onboard access relay to electric strikes or fail-safe/fail-secure electronic locks, integrating a reverse-biased flyback diode across inductive DC lock coils to suppress back-EMF spikes.
  • Exit Peripherals: The controller accepts inputs from standard exit push buttons, infrared no-touch request-to-exit (RTE) sensors, and wireless remote release modules.
  • Auxiliary Ingress/Egress Readers: Connect an auxiliary RS485 slave reader (such as the Biomax N-FR12) or an external Wiegand reader to establish bi-directional, entry-exit tracking over a single door portal.

Wiegand Input & Output Protocol Configuration

The Biomax N-X990 integrates dedicated Wiegand In and Wiegand Out communication ports, enabling flexible integration into third-party security infrastructure:

Wiegand ChannelFormat SupportIntegration Purpose
Wiegand Input26-bit / 34-bitDirect connection of external slave RFID card readers or auxiliary biometric reading units.
Wiegand Output26-bit / 34-bitTransmission of credential data (with or without site code) to external master access control panels.

Network Infrastructure & Data Communication

The N-X990 runs an embedded Linux operating system and provides multiple communication topologies for enterprise system architecture. Direct connection to the local network is established through the standard TCP/IP Ethernet port or integrated Wi-Fi interface. For stand-alone sites or field diagnostics, utilize the onboard USB host/client port for manual transaction log retrieval and user database backups.

Serial communication can be implemented over RS232 or RS485 bus lines. For distributed multi-site projects, the device utilizes real-time push data protocol to automatically synchronize 150,000 log records and 10,000 user templates with centralized web and cloud servers. Optional factory modules such as 4G GPRS, GPS, and micro-printers connect to the system’s auxiliary communication headers.

Commissioning & Access Group Settings

Following wiring verification and power-up, terminal commissioning is completed using the local keypad, 3-inch TFT interface, and 16-bit Hi-Fi English voice prompts. Access administrators can configure door time zones, statutory holiday exclusions, user access groups, and programmable shortcut keys directly on the terminal or broadcast them from desktop, web, or cloud management software.