SMD601 Plus


Gate structure
•	State-of-the-art, robust and washable panels
•	Antivandalic and antitampering IP66 control unit
•	Embedded high precision transit counters (2-beam photocells)
•	Antitampering ON/OFF switch
•	Protected against aging, weather and wear
Operational features
•	High discrimination and transit flow rates five or more times greater than other metal detection systems
•	Quick reset time as short as 0.2 seconds for high throughput rate
•	Very high detection speed (up to 15 m/sec.)
•	Built-in operational functional verification (OFV)
•	One-touch key reading of inbound, outbound and Security Level Data
Quality
•	Continuous self diagnostic system
•	Proven reliability
•	No periodic re-calibration and preventive maintenance required
•	No scheduled maintenance
•	Fully digital design
Alarm signalling
•	Multi-zone display bar for “height on person” localization
•	20 vertical localization zones
•	2 display bars programmable as zone indicators and/or pacing lights
•	Specific shoe alarm color indication
•	Green and red metering signals proportional to the mass of the detected target
•	10 selectable continuous and pulsed tone plus 34 special tones
•	10 selectable sound intensities ranging from 0 to 90 dbA at 1m
•	Random alarm capability with independent counters, alarm tone and alarm volume
•	Met-Identity technology (separate Ferrous and Non-Ferrous alarm signaling)
Type of signalling
•	Fixed or proportional to the mass in transit - visible from 6m under lighting of 4000lux
•	20 x4 distinct zones (20x2 entry side and 20x2 exit side)
Programming
•	Over 40 built-in Security Programs
•	Remote via Infrared Remote Control Unit, BT or Ethernet 10/100 base T (option) interface
•	Security level: International Standard (IS) command / Chip card
•	Local by Control Unit alphanumeric display and keyboard
•	Programming and chip card access protected by user and super-user passwords
Installation data
•	Automatic synchronisation between two or more metal detectors with distance of down to 5 cm without the use of external cables
•	One Touch Automatic Self Installation (OTS)
Certification and compliance
•	Fully compliant with the NIJ-0601.02 Standard requirements
•	Complies with the applicable Standards for Law Enforcement and Correctional Facilities
•	Compliant with applicable International Standards for electrical safety and EMC
•	Compliant with the applicable electromagnetic Standards on Human Exposure and Pacemaker Safety
•	Harmless to magnetic media (CD, tapes, etc.)
Environmental data
•	Powered by safe low voltage DC through external switching power supply adapter
•	Power Supply : 100…277V~ ±10%, 47…63Hz, 50 VA typical consumption
•	Operating temperature: -20°C to +65°C (-37°C to +70°C upon request)
•	Storage temperature: -37°C to +70°C
•	Relative humidity: 0 to 95% (without condensation)
Comprehensive support
•	CEIA provides full operational and technical training support by certified personnel either at CEIA facility or at customer site.